SOG Seal XR Flipper XR-Lock Knife Black FRN (3.9" Black S35VN)

Bought this knife over a year ago and has been my go to for EDC for almost the entire year. Had a few in the rotation. Socom. Civivi. Gerber 06 Military version. TwoSun and various OTFs/manuals. All different weights and sizes and the SOG XR is my go to. Yes it’s beefy. Has noticeable weight in your pocket but does carry very well for me. I don’t mind a big EDC as long as it’s great materials that can handle all the things. This one fits the bill and I assure you that if you get this one you won’t be disappointed. Over the year it has very little wear and I haven’t even had to sharpen or strope it once. Still riding factory blade and so far this blade has not let me down. Everything is perfect with this one. I eyeballed this guy for about 3-6 months before even buying. Watched countless videos/etc. don’t waste your time like I did. Get it playa!!!

Huge chunk of s35vn steel. Feels good in the hand and will get any job done. Opens quick. Also made in the US big bonus.

I’ve been carrying this bad boy for about a month now. And it never fails to impress me. Very fast to open. Speed kills? One day it just might save your life. Gives you several open options. Big folder? I also carry a TOPS 747 MAGNUM. I like big folders. This one might become your favorite. I hope this helps. Jef C.

I have this knife along with the cold steel sr1 tanto and I think the Seal xr is better in most areas. Fit and finish is superb, there are MANY way to deploy the blade, and the blade itself is highly durable as well as being a remarkable slicer.

Just received this big folder and I’m impressed. Have had a TAC XR for about a month now and like it so much I wanted to pick up this beast.
Must say that SOG has been really knocking them out of the park recently after some quiet years.
The QC seems to be spot on with tight tolerances, no rattling, blade dead centered without any movement at all when opened.
The big blade flies out with three options for opening. There’s the kicker (flipper tab), large opening hole on blade, and you can use the xr lock and a flick of the wrist. The blade itself is razor sharp right out of the box.
This is a big beefy folder and blade stock, and with all the aggressive jimping stays fixed in your hand. Also, easy to use with gloves on; which you’re likely to need with long and heavy work because of all the jimping.
Have a bunch of high end knives and this is my third SOG, and if they keep things up not likely to be the last.

Let's get this out of the way: it's a little heavy.

I say "a little" because it is balanced so well and the ergonomics of the grip are so good that the weight doesn't get in the way when it's in the hand.

The action is crazy smooth. The flipper has enough resistance that as soon as you overcome it, it flips right out. If you pull the lock, you can just move your hand and the blade swings right out. Unlock and and swing it back just as easily, all one handed. I bet you could do this with gloves on!

I love the tip on the clip point. A pointy tip is important to me to get a cut started, dig out a splinter, and other fine work, so a fine point has to deal with being delicate. This knife has a fine point and is anything but delicate.

The pocket clip is terrific. Being able to get the clip to engage with my pocket one handed without looking at it is a major grading point of any pocket knife, especially if you're paying big money, and this one is a definite pass.

Even with its size it's manageable in the pocket. Again, the ergonomics are almost weird how well it is designed to make you worry less about the size.

I compare it to my Cold Steel SR1. Overall it feels lighter even though it's a full ounce heavier. The Cold Steel gives you a "chunky" tough feel, but side by side the SOG has a thicker back and thinner taper and tip.

Factory edge is hair popping sharp. The handle material has a great grip and it has jimping on every surface available. Last part to notice is the metal pummel on the bottom that is VERY solid and tough.

Oh hey, look: a HUGE chunk of CPM-S35VN with detailed engineering made in the USA at $170!!!

Buy this knife and carry it when you're not at work. Get a small spyderco, benchmade, or ZT for when you are, and that can be your whole knife setup. OK, realistically just have a whole knife collection and love it when it comes up in your rotation.

I have knives I like, knives I love, and knives that completely surprised me and surprise me every time I take them out, literally two (maybe three) out of a few dozen. This is one of them!

Not a SOG fan but this one is worth every penny and exceeds expectations.As good as any $200 ZT or Benchmade. The design, size, heft, and locking mechanism is top notch. One of my absolute favs. Stop wasting time reading this review and just order the damn thing!

Saw this knife profiled on the SOG Knife Banter a few weeks ago. Exactly what I was looking for as an EDC knife. This is well designed and built. Opening and closing are a breeze and done easily with one hand. The XR lock is solid. The ergonomics of the handle and the FRN (fiberglass reinforced nylon) handle material work well in my hand. Easy to retain the knife in the hand and do big cuts like cardboard boxes as well as small trim jobs. The gimping on the blade really help for the small cut jobs. Who can argue with S35VN steel. Fits well in the pocket. I am lukewarm on the strike pummel, but that feature is in keeping with the tactical nature of the knife. I thought it might be heavy in the pocket but after carrying for a week not so. In addition to its high quality design, construction, and functionality, its just a cool looking knife. Glad I purchased it.

This thing is a hefty beast of a knife. It closes with one hand as smooth as it opens using the SR locking mechanism switch. Very heavy, but built really solid. The jimping all around the handle locks the knife in your hand but not so rough to cause any hot spots. Feeling the quality of this knife in my hand makes me wonder which SOG XR is next on my list...

The craftsmanship of this knife is hands down up there with any high dollar flipper available.Well worth the money. This thing is solid as a tank and comes very sharp. Action is the smoothest of any knife I own. My new favorite blade in my collection by far.

I have had this knife for a bit and i absolutely love this knife. The flipper action on the XR lock makes me wonder why Benchmade can't deliver a great flipper for their axis lock. Very durable and it fills the hands a little better than my Cold Steel Recon. The factory grind came even and sharp out of the box and was perfectly centered. I highly recommend this knife for tough tasks like cutting coax lines.

Excellent